This produces a wonderful smelling soap and the pastel colours compliment the fragrance beautifully. The goat’s milk yoghurt produces a lovely bubbly bar of soap and the silk adds extra smoothness. You can leave out the soap and the colouring if you don’t have those ingredients available to you.
This batch fills a mold size of 25x7x7.5cm and is superfatted at 5%
Olive oil 414g
Sunflower Oil 92g
Coconut oil 46g
Palm oil 92g
Sodium hydroxide 122.485g
170g Goat’s milk yoghurt
179.6g Distilled water
Large pinch of tussah silk
Green mica 1/4tsp mixed into 2ml olive oil
Blue Mica 1/4 tsp mixed into 2ml olive oil
Titanium dioxide 1/2 tsp mixed with 2ml olive oil
Spearmint Essential oil 10ml
Peppermint Essential oil 10ml
Aniseed essential oil 10ml
Prepare your mold, either line it with waxed paper or petroleum jelly to help release the soap when it has hardened. Use plastic or cardboard sheets to make 4 divisions in your mold, I am lucky and my mold comes with acrylic sheets that slot into place. Now you are ready to start soaping. Heat the oils until melted, mix the sodium hydroxide and water together. Wait until the two portions cool down to 35C then mix the two parts together. Blend with a stick blender until the mixture reaches light trace. Add the titanium dioxide and yoghurt to the whole batch and mix thoroughly. (You will have to work fast from now on as the sugars in the goats milk will heat up the batter and you don’t want brown soap!) Separate the batter into three containers, two with 1/4 batter in each and one with the remaining 1/2 of the batter. Add the green and blue mica to the two 1/4 batch containers. Fill up two of the mold sections with white mix and the other two with the coloured batter. Then gently remove the separating sheets. You should now have a mold filled with 4 stripes of differently coloured soap. Take a stainless steel skewer or piece of wire coat hanger and swirl it through the soap in a figure of eight pattern wich will produce a mantra swirl pattern on the top of your soap.
Quickly move your mold into the fridge to make sure the soap doesn’t overheat, and leave overnight to saponify. I took my soap out of the fridge the following morning but the soap was still too soft to unmold and cut so it needed to be left another two days to dry out before it was hard enough to cut.
I thought this was going to be a failure half way through but it all turned out ok in the end, I don’t seem to have much luck with fragrance oils. Every one I have tried so far has caused my soap to set up really quickly. I’d love to hear about other people’s experiences with this.
I fancied something that was a bit indulgent for my shower. I had recently purchased some sweet fragrance oils so I thought I would have a go at a chocolate soap with added cocoa butter and cocoa powder. I didn’t want the soap to have horrible brown lather so I am only used a small amount of cocoa powder and make the colour look a bit darker with some chestnut coloured mica.
Here is the Chocolate Soap Recipe :
Coconut oil 150g
Palm oil 100g
Cocoa Butter 50g
Olive oil 125g
Sunflower oil 75g
Distilled water 190g
Sodium hydroxide 71.85g
10mls Dark Chocolate Fragrance oil
5mls Almond Fragrance oil
5mls Vanilla Fragrance oil
1/2 tsp cocoa powder
1/2 tsp chestnut coloured mica
Slowly mix the sodium hydroxide with the water until it has dissolved completely and set aside.
Melt the oils over a gentle heat until they have dissolved completely then add the cocoa powder and mica.
Wait for both parts to cool to 40C, add the fragrance oils to the other dissolved oils and then combine with the sodium hydroxide. Mix with a hand blender until the mixture thickens. My fragrance oils caused my mixture to trace really really quickly, it only took a couple of bursts and my mixture had begun to set!!! I quickly plopped it into the mold and hoped for the best.
After about half an hour the surface of the soap started to form tiny beads of liquid and the soap started to really heat up in the mold. After doing some research it appears that the soap may have got too hot due to the fragrance oil speeding up the chemical reaction so much. I put it in the fridge to cool it down a bit.
I unmolded the soap the next day and it is fine, no separation and it smells lovely. A kind of chocolatey amaretto smell, almost good enough to eat.